Based
on high integrated microprocessor, IPT Series transmitter is intelligent
on-site installation explosion-proof transmitter, which can be connected with N
or G Series Mass Flow Sensor, achieving
the direct measurements of mass flow, density, temperature(of tube wall)of
fluid.
● Functions
1.To achieve the direct measurements of flow, density and temperature, meanwhile indirectly measuring volume flow;
2.To achieve the exchanging of transmitter without matching the sensor for calibrating again;
3.Outputting frequency, electric current and RS485 signal, and the output parameters can be also configured;
4.There are three keys for operating and achieving the functions of configuration, checking, etc;
5.There are double lines display for prompting the operations of measurement parameters and configuration;
6.The communication protocol are MODBUS RTU and HART V5.0, which can be configured on site; FF is only for option;
7.There are the functions of flow cut, zero calibration and slug flow control;
8.There are the functions of limit of flow and over-limit alarming;
9.The damping factor can be adjusted, and smooth variables are displayed as output;
10.Indicating of faults state: showing the alarming information, status light is indicating;
11.Allowing the specific values output of flow, circulation current and frequency.